- Opening of a new workshop with an area of 1000 square meters for the production of blanks made of polyurethane, rubber, and fluoroplast. Opening of the laboratory.
- Opening of a 450 square meter seal sales department office.
- Opening of a new modern dining room for our staff.
- Opening of a new branch in Odintsovo.
- Opening of a new production facility, a workshop measuring 2,500 square meters. A cylinder repair and production building with a new large and bright design office.
- Opening of a new branch in Nizhny Novgorod.
- The opening of a new direction “laser surfacing” is a robotic laser complex that allows you to work with large-sized parts
- Construction of a new production facility dedicated to the production of hydraulic cylinders
- The production of general and special purpose polyurethane blanks using advanced technologies, raw materials and equipment has been mastered
- In order to provide express repair services, a separate site has been allocated in our production for urgent repair of hydraulic cylinders.
- Commissioning of a power press for straightening shafts at the production site of chrome rods with HDPE
- A site of own production of polyurethane blanks with a diameter of up to 1600 mm has been organized.
- Opening of a branch in Novosibirsk
The second production stage of the Promtube production company has been launched.
A vertical machining center of the KF 5600 brand from HYUNDAI, manufactured in South Korea, was put into operation at the site of CNC machines.
Conclusion of a cooperation agreement with the Italian company for the production of clamps for high-pressure pipes AEGI Clamps.
The certificate of the official representative in the territory of the Russian Federation from the Swiss partner Dichta SA is received.
The construction of a new workshop for the production of sealing elements (Seals) has been completed.
The electroplating production site has been launched.
The second production stage of the Promtube production company was launched.
A vertical machining center of the KF 5600C brand from HYUNDAI, manufactured in South Korea, was put into operation at the site of CNC machines.
Conclusion of a cooperation agreement with the Italian company for the production of clamps for high-pressure pipes AEGI Clamps.
Conclusion of a cooperation agreement with the Italian company for the production of high-pressure tube clamps AEGI Clamps.
Commissioned a new building designed for office and welfare premises.
Commissioned a unit for rod induction hardening.
Increased the production capacity of the seal production area. Commissioned another SML 500e Plus automatic system made by Seal Maker Produktions-und Vertriebs GmbH (Austria).
Commissioned a new warehouse complex for the storage of precision tubes and chrome-plated rods with an area of about 3000 sq. m.
Increased the pool of turning and milling machines by a new vertical machining centre with permissible table placement size of 1600x650 mm and maximum weight of machined parts up to 1300 kg.
Obtained a distributor status with Seal Maker Produktions-und Vertriebs GmbH (Austria).
Commissioned a thermal section with a high-temperature horizontally loaded chamber furnace and a highly accurate temperature setting, as well as a quenching bath for heat treatment in an oily working environment.
Received an official confirmation of the status of an exclusive distributor of Salzgitter Mannesmann Precision GmbH (Germany) for the supply of seamless cold-drawn precision pipes according to EN 10305-4/DIN 2391.
Obtained a certificate of a manufacturer of hydraulic cylinders for marine shipbuilding from the Russian Maritime Register of Shipping.
Obtained the status of an official representative of Semperrflex, Austro-Czech enterprise, in the territory of the Russian Federation in the sphere of Semperit hydraulic and industrial hoses.
Commissioned a new, high-performance horizontal boring machine equipped with a Mitsubishi CNC with a 24-position tool drum.
Commissioned a new administrative and amenity building with an area of about 500 sq.m.
Signed an exclusive agreement on the right to represent products of NIMET, a manufacturer of chrome-plated bars, on the territory of Russia, Armenia, Kazakhstan.
Concluded a supply contract for high-pressure hydraulic pipes with Mannesmann AG (Germany), a large European manufacturer.
Assembled a new semi-automatic CNC lathe at the mechanical production of OOO PTK KRPMS, that provides for expanding the range of standard sizes for repairing and manufacturing hydraulic cylinders.
Mastered the production of telescopic hydraulic cylinders of unique design. In order to expand the size range of telescopic hydraulic cylinders for mechanical production, we purchased a circular grinding machine, that makes it possible to machine parts with a diameter up to 400 mm, length up to 2,520 mm and weight up to 1000 kg.
Passed certification on compliance with the requirements of the World Trade Organization (WTO) related to application of uniform international rules and regulations to process management and overall company’s management.
Started cooperation with CIDAT SpA, a well-known Italian manufacturer of hydraulic and industrial hoses and connections.
Signed a cooperation contract with one of the world leaders in production of hydraulic and pneumatic seals, AS Aston Seals.
Established a new representative office of the company - Moscow branch, offering its customers a full list of products, including hydraulic cylinders, fittings and high-pressure hoses, imported and domestic seals.
Commissioned a warehouse for storing large lots of seals of all sizes.
Mastered the repair of complex hydraulic equipment - vibratory pile drivers manufactured by ICE (Holland), designed to drive into the ground and extract various pile elements; this equipment consists of a hydraulic station driven by a Cummins diesel engine, a vibratory unit and grippers.
Commissioned a new warehouse with an area of 1,800 square meters for storing bars and tubes, fully equipped with modern specialized equipment.
Participation in STT-2013 annual international exhibition of construction vehicles, equipment and technologies, which brought together the largest manufacturers and suppliers of vehicles, equipment, components from Russia and 30 other countries.
OOO Staltube started promoting the products of OOO PTK KRPMS in Izhevsk, and PK PromTube – in Bashkiria, Tatarstan, Udmurtia and the Kirov region.
Further expansion of the machine pool: purchased a CNC lathe, which allows for machining parts up to 3,000 mm long with a diameter up to 500 mm, and a CNC milling centre. Purchasing new equipment expands the engineering capabilities of the company, makes it possible to fulfil our customers’ orders better and quicker.
Agreement concluded between STELMI ITALIA SpA and OOO PTK KRPMS on exclusive representation of the company in Russia, Belarus, Kazakhstan.
Official certificate given including the company in the register of members of the Non-Profit Partnership (self-regulatory organization) Manufacturers of Road-Building, Utility and Ground-Based Aerodrome Equipment.
Agreement concluded with Bryansk Aggregate Mechanical Plant Closed Joint-Stock Company on representing the interests of OOO PTK KRPMS and OOO PK Promtube for the sale of honed tubes, hollow and solid bars in the Bryansk, Smolensk and Oryol regions.
During "Construction Equipment and Technologies 2012" specialized exhibition, at the general annual meeting of AGPO members, OOO PTK KRPMS joined the Association of Hydraulic Equipment Manufacturers (AGPO), bringing together plants manufacturing hydraulic units and organizations for the promotion of engineering hydraulics on the mobile equipment and industrial equipment market.
A new assembly workshop commissioned. An area of 1500 sq.m. comprised a welding area, an ultrasonic washing section, a powder coating section, an assembly and testing section. New equipment was purchased to equip the workshop.
The company received and installed a CNC tube lathe.
A contract was concluded with Hyva Rusland on the creation of a service centre for maintenance of HYVA hydraulic equipment on the basis of OOO PTK KRPMS.
A new assembly workshop started working on March 21, 2011. The workshop area is 1100 square meters.
A honing machine was purchased, which allows to hone tubes for manufacture of cylinder tubes with internal diameter from 25 mm to 500 mm and with length up to 8000 mm.
HYUNDAI-KIA SKT300LM CNC turning and milling machine was purchased, which enables machining parts with diameter up to 500 mm, length up to 1260 mm.
Сompany employees trained in Austria at Seal Maker; high-performance equipment SML 500e Seal Maker was purchased—a revolutionary integrated CNC system expanding the boundaries of the sealing manufacturing technology.
Purchased a vertical machining centre. V 1000 machine is designed for machining parts by vertical milling and drilling.
Commissioning of a new warehouse building.
Negotiations held on cooperation with major European companies specializing in manufacturing precision chrome-plated and nickel-plated bars and tubes for hydraulic cylinders: NIMET (Romania), STELMI (Italy). Agreements were concluded.
The list of spare parts suggested by OOO PTK Kalugaremputmash-Servis for delivery under the import substitution program in order to minimize purchases of import products was developed and approved by the Department of Railways and Structures at JSC Russian Railways, Project and technology engineering department for tracks and track machines - branch of Russian Railways. On the initiative of General Director D.V. Vasilyev, the main nomenclature of imported hydraulic cylinders was replaced by domestic analogues, which allowed the company to get a grip as the main supplier on the Russian railways network for many years.
The company was certified according to the quality system GOST R ISO 9001-2001 (ISO 9001-2000).