Connection of pipelines using cutting ring adapters enables:
Simple assembly and high repairability;
Easy upgrading of the system;
Assembly of hydraulic system in hard-to-reach places.
The range of pipe connections available enables the assembly of a hydraulic circuit of any complexity.
Hydraulic pipe attachment clamps
- The clamps are used for attachment of hydraulic pipes, high-pressure hoses and power cables. They ensure fast and reliable attachment in case of vibration loads on the pipeline during the hydraulic system operation.
- Pipe threaded connections under DIN 2353 (hydraulic pipe adapters)
- Threaded adapters (pipe connections) are used for a quick connection of hydraulic pipes. Such adapters enable a quick and tight connection of seamless pipes of the same diameter and of different diameters from 6 mm to 42 mm.
- Pipe connections under DIN 2353 with a cone angle of 24 degrees can be direct and angular at 90 degrees. Pipe connections are made with a nut and a cutting ring which enable a quick and quality assembly and disassembly of a hydraulic connection.
- The assembly is quite easy: as the nut is tightened, the double-edge cutting ring deforms the pipe driven by the tightening force and the 24° cone of the hydraulic adapters. Cutting-in is done at two points.
- The first cutting-in or sealing takes place at the pipe end to ensure tightness of connection.
- The second cutting-in prevents the vibration impact on the first seal and retains the ring at a specified distance from the pipe end.
- Pipe connections are made of carbon steel and AISI 316 ti stainless steel.
- The surfaces of all hydraulic fittings excluding those designed for welding operations are galvanized in accordance with ASTM-B-117 and ISO 9227.
- It ensures more than 400 hours of corrosion resistance in salt fog. Threaded parts and, consequently, the inner cleaning state are protected with plastic plugs.
- Our company keeps in stock only products of reliable European suppliers such as: FOR fittings SPA., RastelliRaccordi, CAST.
Use the dimension table specifying the European suppliers to find a supplier code and order a pipe connection in accordance with a diameter of hydraulic pipes and operating pressure.
FOR fittings SPA catalogue.
Rastelli Raccordi catalogue.
Download a quality certificate for the hydraulic connections
Pipe threaded connections under DIN 2353 (hydraulic pipe adapters)
Threaded adapters (pipe connections) are used for a quick connection of hydraulic pipes. Such adapters enable a quick and tight connection of seamless pipes of the same diameter and of different diameters from 6 mm to 42 mm.
Pipe connections under DIN 2353 with a cone angle of 24 degrees can be direct and angular at 90 degrees. Pipe connections are made with a nut and a cutting ring which enable a quick and quality assembly and disassembly of a hydraulic connection.
The assembly is quite easy: as the nut is tightened, the double-edge cutting ring deforms the pipe driven by the tightening force and the 24° cone of the hydraulic adapters. Cutting-in is done at two points.
The first cutting-in or sealing takes place at the pipe end to ensure tightness of connection.
The second cutting-in prevents the vibration impact on the first seal and retains the ring at a specified distance from the pipe end.
Pipe connections are made of carbon steel and AISI 316 ti stainless steel.
The surfaces of all hydraulic fittings excluding those designed for welding operations are galvanized in accordance with ASTM-B-117 and ISO 9227.
It ensures more than 400 hours of corrosion resistance in salt fog. Threaded parts and, consequently, the inner cleaning state are protected with plastic plugs.
Our company keeps in stock only products of reliable European suppliers such as: FOR fittings SPA., RastelliRaccordi, CAST.
Use the dimension table specifying the European suppliers to find a supplier code and order a pipe connection in accordance with a diameter of hydraulic pipes and operating pressure.
FOR fittings SPA catalogue.
Rastelli Raccordi catalogue.
Download a quality certificate for the hydraulic connections
Cutting rings and nuts for connection of hydraulic pipes under DIN 2391.
Direct connections (pipe to pipe) for connection of hydraulic pipes of the same diameter under DIN 2391.
Angle connections (pipe to pipe) for connection of hydraulic pipes of the same diameter under DIN 2391.
Triple connections (pipe to pipe) for connection of hydraulic pipes of the same diameter under DIN 2391.
We deliver our products by our own transport to Moscow and by our own transport to terminals of PEC, Business Lines and Glavdostavka.
Pipe clamps (hydraulic pipe fastening shoes) are also used for assembly/attachment of hydraulic pipes. Single-pipe and double-pipe polypropylene fasteners with welded plates are available at our storage facility. More info on pipe fasteners:
Our company has a big inventory of galvanized pipes and phosphated pipes with standard dimensions under DIN 2391 to completely satisfy the demands of our customers.
Extra discount is granted when purchasing a set of hydraulic pipes + pipe connections + pipe fasteners.